Specifications

The following notes prepared to meet the company’s obligations imposed by the Health   & Safety at Work Act 1974 (Amended 1988) are of a general nature only. Specific    information regarding installation use and disposal appropriate to individual models    is provided in the instruction leaflet packed with the product, or can be found on the relevant pages of this catalogue.

The Health & Safety at Work Act 1974 imposes upon the users of the company’s   products an obligation to ensure that all personnel involved in the installation, handling,   use or disposal of these products are acquainted with the information provided by the Company and are made fully aware of any precautions that need to be taken.

The installation of these products should only be carried out by a qualified contractor in accordance with the instructions supplied with the product.

 

Specifications

Leadership in design is based on constant development and improvement. Whilst great   care is taken to give up-to-date information in this publication, the right is reserved   to change any specifications herein detailed, without prior notice. All descriptions, illustrations etc, in this publication shall not form part of any contract.

Track and Spotlights

All track and spotlights are designed for normal, dry interiors, and are not   recommended for use in damp or corrosive situations. Adequate ventilation will be   necessary when tungsten spotlights are used in confined spaces where elevated temperatures will occur.

Lamps

Wattage and where applicable type of lamp are shown for every fitting. Incorrect lamps   may affect efficiency, change the planned distribution, create glare and in some cases,   seriously overheat the luminaire. Unless otherwise stated all luminaires are supplied without lamps.

Wiring

The majority of luminaires are fully prewired and with heat resistant cable wherever required.

Weights

Where given, the weights of luminaires do not include lamps.

Track and Spotlights

All track and spotlights are designed for normal, dry interiors, and are not   recommended for use in damp or corrosive situations. Adequate ventilation will be   necessary when tungsten spotlights are used in confined spaces where elevated   temperatures will occur.

Transformer & Control Gear

Transformers and Control Gear are available for 240V 50HZ and 230V 50HZ with other options subject to special quotation.

240V 50HZ will be supplied unless any other voltage is requested at the time of ordering.

Ceiling Cut-outs

Throughout this publication cut-out sizes refer to the aperture for the ceiling ring with   recessed fittings when mounted in soft fibrous tiles. For timber or metal tiles and cast-in construction, check dimensions on site.

Product colours and finishes

The SAKAR range of standard colours has been rationalised. This change   situation has provided  SAKAR with the opportunity to harmonise our standard colours in line with developments that have taken place in architectural materials and building accessories.

For reference the standard paint finishes are now:
SAKAR luminaire
RAL 9005 Jet Black Black   RAL 9006 White Aluminium Silver   RAL 9010 Pure White White RAL 9016 Traffic White White

SAKAR Outdoor luminaires
RAL 9007 Light grey Grey

LED Lamps   
RAL 9023 Dark Silver RAL 9016 Traffic White

Please note:

  • Due to photography and the printing process the colours reproduced in this catalogue may not be truly representative.
  • Though paint colours may be the same, gloss, matt, satin and textured finishes will appear different.

Protection of Electronic Components

All products incorporating electronic components are protected against damage which may result from transients on the mains supply.

The level of protection incorporated is generally in excess of the minimum level specified in the current international standards.

It is the customer’s responsibility to ensure that electronic equipment is not subjected   to transients above these international immunity standards. In extreme cases additional suppression devices may be needed on the mains supply. The company does not take   responsibility for damage to products caused by excessive mains transients. Patents   Many of the products listed in this publication are the subject of Patents or Patent Applications and/or Design Registration UK and other countries.

 

TOP